Home 9 Sensors 9 Boat Hatch Sensor

Boat Hatch Sensor

This sensor is exclusively compatible with boats that are already equipped with Seanapps. To equip your boat, discover the Seanapps Retrofit Pack.

PRICE: €169*

Ref : 225967

The Hatch Opening Sensor is a versatile and essential piece of equipment for the safety and management of storage spaces on your boat.

Pay later: Pre-order online and pay with your installer upon delivery.

Delivery: directly to your authorized installer – Delivery fees not included.

*VAT rate not included + excluding delivery and installation costs.

Designed to monitor various mechanical and electrical devices, this sensor provides updates every 4 seconds, ensuring a rapid and reliable response. Whether it’s to control access to storage compartments, chests, or hatches, this sensor ensures that everything remains secure during your voyages.

This advanced device reports the status of an external dry contact, useful for mechanical chest opening sensors or high water level detection. It is powered by a CR2450 3V battery, offering an impressive battery life of approximately two years. With a clear battery indicator – 90% >2.4V / 50% >2.3V / 20%>2.1V /Alarm<=2.1V – and an LED signal that flashes at startup and every 60 seconds when the battery is low, you are always informed about the state of your sensor.

Compact (70x45x21mm) and elegantly designed in white ABS plastic, it can be easily installed with adhesive or two screws. Its Bluetooth Low Energy 5.1 connectivity ensures a range of 15 to 20 meters in open space, facilitating integration with the Seanapps application through a simple QR code scan. For optimal installation, the sensor should be placed indoors, with the connector oriented downwards, and accessible for battery replacement.

The Seanapps hatch sensor is thus a smart and efficient solution for navigating with increased peace of mind, knowing that the critical areas of your boat are under constant surveillance.

  • Data: Status of an external dry contact (mechanical sensor opening trunk, high water level detector, all detectors integrating a contact)
  • Data recurrence: 4 seconds
  • Battery type: CR2450 3V
  • Battery life: Approximately 2 years
  • Battery data: 90% >2.4V / 50% >2.3V / 20%>2.1V /Alarm<=2.1V
  • Connector type: Micro Fit 3 points
  • Led: Flash at power ON / Flash every 60s if battery <2.5V
  • Protection against polarity reversals
  • Product dimensions: 70x45x21mm
  • Color: White
  • Material: plastic (ABS)
  • Fixing: gluing or x2 screws diameter 3mm
  • Protocol: Bluetooth Low Energy 5.1
  • Range: 15 to 20m in free field
  • Protection: tropicalized electronic board/No protection against water splashes
  • Seanapps pairing: QR code

It must be placed inside the connector facing downwards. Harnesses are available to connect to the contact sensors. It must be installed to be accessible to change the battery.

24-month commercial warranty
In case of a breakdown, the product is repaired free of charge by your dealer. If repair is not possible, the product is exchanged.

Dedicated customer service
Contact your certified Seanapps dealer for any questions regarding installation, configuration, or problem reporting.

NMEA 2000

3G/4G/5G NETWORK

FIT WITH ALL BOATS

6000 BOATS ALREADY EQUIPPED WORLDWIDE

These sensors might also interest you

Outboard motor
anti-theft sensor

€79

Boat Door
Sensor

€79

Tender anti-theft
sensor

€79